1) suitable for two -side veneered chipboard, or MDF borad, Fiber board etc.
2) maximum sloting depth is 2mm.
3) Long life
4) Power saving
5)Adjustable scoring sets consist of two 12-tooth saw blades with shims to adjust the kerf width (2.8mm to 3.6mm).
The scoring circular TCT Saw blade is specially designed to slot at the bottom of different kinds of veneers including cork, hardwood, cut deal, shaving board, sing-side veneered shaving board, two -side veneered shaving board, two-side plastic veneered shaving board, single-side veneered MDF board, plywood, fiber board, etc.
Avoiding the crack of veneers and featured by a high precision and a sharp cutting edge. The scoring circular TCT saw blade is widely applied in precision table saws, reciprocating saws, electronic material saws and other cutting equipment of decoration, construction and engineering industries. The scoring circular TCT saw blade can be used with one blade or two blade in a pile.
With the help of gaskets, height of the saw blades can be adjusted to make the cutting with of them consistent with the main saw. For example, with five gaskets, two of 0.1mm and three of 0.21mm and two 1.41 mm blades, you can achieve a thickness of 3.21mm by pilling up the two blades and two 0.2mm gaskets, 1.4*2+0.2*2=3.21mm.
Note that workers must wear shields, helmets, working boots and safety goggles before using the scoring circular TCT saw blade. Gloves are not allowed and long hair must be put in the helmets.
Also watch out the tie and cuff to avoid being intertwine or drawn into the machine. When the saw blade is under maximum operation speed, it must be stopped as soon as abnormal noise is heard or any shock occurred. Checking the machine when the cutting surface is no longer smooth or smells strange will prevent accidents. We suggest hanging the scoring circular TCT saw blade on dry shelves instead of moist places after using. Placing these tools flat on the floor or shelves may lead to the deformation of the blades.